本文共 4602 字,大约阅读时间需要 15 分钟。
在Linux或者Android-x86系统下,会用到测试键盘、鼠标、触摸屏等各种输入设备的功能,那么下面的这段代码是个好的选择。首先编写了个Linux输入设备的测试小程序来检测问题所在,总算也小有成就。具体输入设备的路径,大家可以用cat /proc/bus/input/devices查看自己机器的设备文件。 检测按键的程序如下:#include#include #include #include #include #define NOKEY 0int main(){ int keys_fd; //按键句柄 char ret[2]; struct input_event t; keys_fd = open("/dev/input/event0", O_RDONLY); if(keys_fd<=0) { printf("open /dev/input/event0 device error!\n"); return 0; } while(1) { if(read(keys_fd,&t,sizeof(t))==sizeof(t)) { if(t.type==EV_KEY) //获取的是按键消息 if(t.value==0 || t.value==1) //返回值是1或者0 printf("key %d %s\n",t.code,(t.value)?"Pressed":"Released"); //1表按下,0表弹起 } } close(keys_fd); return 0;}
执行结果如下:
检测触摸屏的程序如下:
#include#include #include #include #include int main(){ int keys_fd; char ret[2]; struct input_event t; keys_fd = open("/dev/input/event1", O_RDONLY); //打开TP设备 if(keys_fd<=0){ printf("open /dev/input/event0 device error!\n"); return 0; } while(1) { if(read(keys_fd,&t,sizeof(t))==sizeof(t)) { if (t.type == EV_KEY){ printf(" type: EV_KEY, event = %s, value = %d \r\n", t.code == BTN_TOUCH ? "BTN_TOUCH" : "Unkown", t.value); } else if(t.type == EV_ABS){ printf(" type: EV_ABS, event = %s, value = %d \r\n", t.code == ABS_X ? "ABS_X" : t.code == ABS_Y ? "ABS_Y" : t.code == ABS_PRESSURE ? "ABS_PRESSURE" :"Unkown", t.value); //该处使用了一些特殊的用法:: } } } close(keys_fd); return 0;}
执行结果如下:
关于Input设备,说明:
(1)ls -l /dev/input,得到设备名称和属性,注意此处没有input号这种Input层分配的内容,以event为主。如:
# ls -l /dev/input
crw-rw---- root input 13, 66 1970-01-01 00:00 event2 crw-rw---- root input 13, 33 1970-01-01 00:00 mouse1 crwxrwxrwx root input 13, 65 1970-01-01 00:00 event1 crw-rw---- root input 13, 32 1970-01-01 00:00 mouse0 crw-rw---- root input 13, 64 1970-01-01 00:00 event0 crw-rw---- root input 13, 63 1970-01-01 00:00 mice如果这么些设备中无法确认哪个是目前在用的设备?可以采用这种方式:cat他们,然后操作鼠标或者键盘,哪个输出乱码就是用的哪个。
(2)cat /proc/bus/input/devices,主要信息是:
N: Name="s3c-keypad-rev0000"
P: Phys=s3c-keypad/input0 S: Sysfs=/class/input/input0 H: Handlers=kbd event0N: Name="S3C TouchScreen"
P: Phys=input(ts) S: Sysfs=/class/input/input1 U: Uniq= H: Handlers=kbd mouse0 event1N: Name="ADXL34x accelerometer"
P: Phys=1-0053/input0 S: Sysfs=/class/input/input2 U: Uniq= H: Handlers=mouse1 event2分配的Input节点全在Sysfs上,真正的设备dev在Handlers上。
(3)ls -l /sys/class/input,类设备信息:
drwxr-xr-x root root 1970-01-01 00:00 mice
drwxr-xr-x root root 1970-01-01 00:00 input0 lrwxrwxrwx root root 1970-01-01 00:04 event0 -> input0/event0 drwxr-xr-x root root 1970-01-01 00:00 input1 lrwxrwxrwx root root 1970-01-01 00:04 mouse0 -> input1/mouse0 lrwxrwxrwx root root 1970-01-01 00:04 event1 -> input1/event1 drwxr-xr-x root root 1970-01-01 00:00 input2 lrwxrwxrwx root root 1970-01-01 00:04 mouse1 -> input2/mouse1 lrwxrwxrwx root root 1970-01-01 00:04 event2 -> input2/event2参考原文:
转载地址:http://ibbsi.baihongyu.com/